New Aerotow video of Yando's Goat

Not mine, but fun to watch!  I'm getting mighty close to placing an order for wing materials finally :-)  Quote in hand, just need to hit the order button.

Yando Goat

I've been slack getting wing materials... but the Yando Goat is up and flying!

More training time

Over the last few weeks, I've done more flying than in a long while. I'm calling it all flight training to keep the wife happy ;-)

A friend and I are working on a new thermal-finding instrument for full-scale applications, so he took me up on a familiarization flight in the North Carolina Soaring Association's Grob Twin-II.

Since I'm pretty sure Brett wanted to see if I got sick, we did a bunch of acro and wore parachutes as a precaution. Conditions were already way over-developed and it was flat out raining on us before the tow. Then Brett's breath was fogging up the canopy (he sat in front). On ground roll and tow, he was wiping the inside while the accumulated drops on the canopy came streaking past like Star Trek. Did I mention the canopy seals aren't great and it was practically raining on us inside too?

Anyway, it was neat being in an airplane in the rain, basically the same sensations and sounds to driving fast in a car through a downpour. We still did three wing-overs, some zero-G pushovers and a very interesting feeling negative G pushover. I got to fly us back to the airport in the rain a bit. It was surprising how sensitive the rudder felt compared to the little Cessna. I need to work on coordination, but the task of keeping the plane in the sky was relatively easy.

Just yesterday, I finally took hang-gliding lessons through Kitty Hawk Kites flying at Jockey's Ridge State Park ... the back-story is that I had a 10-year old "wind check" from trying to do this once before and getting blown out due to high winds. Kitty Hawk Kites honored their well-worn receipt!

Okay, so the Eaglet wing is certainly no high-performer, but my five flights were sufficient to get the feeling of how different (and entertaining!) hang-gliding is. I think the most interesting parallel to Goat flying is the feeling of being out in the open air. No instruments, just the feeling of air on my face and the sounds of the wind in the wings. Five flights of probably 15 seconds is by no means conclusive or constitutes a training regimen. However, I'm happy to personally have the exposure to the origins of the Goat and get the best parallel I can think of to the flying sensations.

Back to the Grob in a month and a half for more flight testing. Maybe I can finish off the tool chest and get back to hobby work for a bit?

How about a hang-gliding video??

Side Project -- continuing to set up the shop

In the do-it-yourself spirit, I have been working to build up my shop capabilities and storage space. The first real project was (is) a shop tool chest to finally combine all my smaller storage into one central location. Or if you're reading between the lines, it was an excuse to try my hand at furniture fabrication ;-)

I have had the tool chest case done for a few weeks and finally today cut out all but one of the drawers. The upper three are installed, the lower two ready for drawer slides, and the sixth is waiting for a measurement of what space is left over before I knock it out on the new (used) table saw. I love the stacked dado set ... I had always watched Norm Abrams on New Yankee Workshop and wanted to try that myself. It takes a bit of time making sure the settings are right, but then it's really easy to knock out a half dozen parts in mere minutes.

Next up is the false fronts that absorb any visual misalignment that the drawers have. That's a project for another weekend I'm afraid.

Another picture of moving Goat

Haven't figured out how to trailer Goat quite yet ... I cheated and used the open structure as fair game for lashing ;-)

Actually doing some work

It may not be a glamerous part, but its a flight piece.

A new home for Goat

Still without internet access, I'm posting via my phone to keep up a monthly post. Goat has moved to a nice large basement area with access to more than one tool at a time. I even bought a whole bunch of nice oak ply sheets to make a sturdy and true table for constructing the wings. There is of course some setup to go still before being back on real Goat construction, but the next project (other than fixing the occasional water heater and lousy hvac system) is the airchair. I have renewed confidence in both the design and my skills after watching the ground loop in last post's video. This just might work :-)

New Goat video online ... and a move

I recently came across a new Bug (son of Goat) video, showing some auto-towing at Soggy Dry Lake: http://www.vimeo.com/21046038. Thanks to the San Bernardino fliers!

In other news, I'm moving over the next couple of weeks to a place with a dedicated hanger (okay, basement and garage) for my Goat project. Expect to see some renewed progress over the summer!

Progress is slow, but coming.