The to-do list

Digging up the old to-do list from 2016, what else is accomplished that wasn't done back then, and what else is on the list?

Nose:

• DONE make a nose skid (G4N10)
• change control stick axis bolt to drilled with cotter pin (will have to remove the torque tube)
• sidewalls in forward nose section (G4N13)

Tail:

• DONE replace lower horizontal strut to tail connection bolt with a longer one
• DONE check all bolts are appropriate grip lengths 
• DONE LATER find/make draw-string baggie for protecting the control cables during transport

Wing:

• DONE glass the ribs to LE and TE
• DONE leading edge shell (G4S9)
• stiffener for aileron control line
• DONE 2019 foam blocks on the lower wing surface for covering support at the compression struts?  I think Yando Goat did this.

Miscellaneous:

• DONE wrap every pulley with tape and heat shrink to hold stiff and straight
• DONE check every quick pin for elastic retainers are both present and correct length (several are just singles)
• threadlock on every quick-link 
• DONE 2019 covering reinforcement patches
• DONE 2019 painting
• DONE LATER mount the airspeed sensor to the forward nose tube

Buy list:

• DONE covering and adhesive
• DONE (1x) 1/8" SS quick-link
• radio (walkie-talkies of some variety) 
• tow line

Other:

• reassemble the trailer
• extend the trailer tongue
• make a platform/box for the trailer to carry Goat
• set up a car for towing (hitch + wiring)
• DONE 2021 tags for the trailer (inspection??)
• DONE 2021 sort out a car towing arrangement
• find a place to fly

Uhg.